Cema Headset Bearing 41.8x32.7x6

CEMA Headset Bearing 41.8 x 32.7 x 6 mm 45°/45°

CEMA Headset Bearing 41.8 x 32.7 x 6 mm 45°/45° is a high-quality steering bearing for integrated and compatible steering bearing solutions. The steering bearing is a small but extremely important part of the bike's steering: it enables the handlebars and fork to move smoothly, without play, and with light rotation.

This bearing is suitable for situations where the dimensions of the old steering bearing are 41.8 mm outer diameter, 32.7 mm inner diameter, and 6 mm height, with contact angles of 45°/45°. When choosing a steering bearing, outer diameter alone is not enough; the inner diameter, height, and contact angles must also match the old bearing or the requirements of the frame/steering bearing.

A CEMA bearing is a good replacement for a worn, noisy, seized, or loose steering bearing. The chrome steel construction offers precise rotation and good durability in normal road, gravel, and mountain bike use, provided the bearing is installed correctly and protected from moisture and dirt.

CEMA 41.8 x 32.7 x 6 mm steering bearing - specifications and compatibility

Steering bearing wear is often visible as noise, play, stiff steering, or play when pressure is applied to the front brake. A new bearing of the correct size restores steering precision and makes the bike safer and more pleasant to ride.

This CEMA bearing is an angular ACB steering bearing with contact angles of 45°/45°. Contact angles are a particularly important compatibility specification, as a 45°/45° bearing should not be replaced with a 36°/45° bearing, even though the outer dimensions may look almost the same. The wrong contact angle can cause a poor fit, play, creaking, or premature wear.

Specifications

• Product: CEMA Headset Bearing 41.8 x 32.7 x 6 mm
• Product type: steering bearing
• Bearing type: ACB / angular contact bearing
• Outer diameter: 41.8 mm
• Inner diameter: 32.7 mm
• Height / width: 6 mm
• Contact angles: 45°/45°
• Material: chrome steel / chrome steel
• Color: silver / steel
• Application: bicycle steering bearing
• Manufacturer code: SRC-HS-JS12

Compatibility note

• Check the dimensions of the old bearing before ordering.
• The dimensions must match: 41.8 x 32.7 x 6 mm.
• The contact angle must be 45°/45°.
• Not the same product as the 41.8 x 30.1 x 6.5 mm bearing.
• Not the same product as the 41.8 x 30.5 x 8 mm bearing.
• Does not replace a bearing with a 36°/45° contact angle.
• It is advisable to confirm the fit of the steering bearing from the markings on the old bearing or by measuring.