Levyjarrusarja SLX M7000 Taka
Hinta: 73,00 € 79,00 €
Shimano SLX M700 uutuus jarru.
High braking performance and ease of use: the SLX M7000 disc brakes by ShimanoForward motion becomes more efficient and the durability of the components allow more abuse in downhill rides. The SLX M7000 hydraulic disc brakes are the industry benchmark for affordable high performance components. The “Rider Tuned” position of the SLX BL-M7000 lever allows smooth, consistent and predictable operation of the hydraulic disc brake and in combination with cooling fins, you get high braking performance during any riding conditions.
Specifications:Series: SLX M7000
Application: MTB, Cross Country, Enduro, All Mountain
Brake Type: disc-brake
Mount: post mount (IS with adapter)
Hydraulic Fluid: Shimano mineral oil
Cable Length: 1000 mm (front) / 1700 mm (rear)
Technical Information - Lever:Lever Material: aluminium, anodized
Body Material: aluminium, painted
Lever Length: 2-finger
Reach Adjust: yes, no tools required
Contact Point Adjust: no
Brake Hose: SM-BH90-SBM
Hose Connection: straight
Bleeding Tool: funnel
Technology: I-Spec II
Technical Information - Caliper:Material: aluminium (painted), stainless steel bolt (5 mm)
Brake Pistons: 2 pistons (ceramic)
Brake Pads: G02S resin
Recommended Rotor: SM-RT70, SM-RT66
Hose Connection: banjo
One Way Bleeding: yes
Features:- high braking performance during all riding conditions
- a high performance and controllable brake for all MTB-disciplines
- allows smooth, consistent and predictable operation
- easy maintenance
When you pull a servo wave brake lever initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control.
The XT levers are fit with the new I-Spec II system. This system combines the shifter and brake lever into one clamp that can be mounted on the handlebars. I-Spec II gives more freedom in cockpit placement, saves weight, and more mounting possibilities for a more ergonomic design. Easily installed with smaller clamps leaving more space on the handlebars. Maximum adjustment parameters: vertical 15°, horizontal 12 mm. I-Spec II brakes are not compatible with I-Spec or I-Spec B or I-Spec EV shifters.
One Way Bleeding
One way bleeding was developed for quick and easy prevention of air in Shimano’s hydraulic system. Shimano has streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system.
The fade, which can occur to rotor and pad when braking on a long downhill ride for instance, has a negative impact on the braking performance. Shimano has adopted Ice Technology rotors and Ice Technology pads to realize the cooling technology for consistent performance. The rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400 °C to 300°C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the rotor blade and the radiator fin provide long pad life, less noise, less fade and are lightweight.
XTR, Saint, Deore XT, SLX, Zee, Deore LX calipers are bundled with Ice Technology pistons in order to achieve optimized lightweight, high rigidity and heat dissipation. Oversized pistons transfer hydraulic power directly to the brake pad, and ceramic material is used to avoid heat transfer for constant stable braking, providing efficient stopping power transfer without loss.
Factory Numbers:M7000LFPRA100 + I-M7000RRXRA170
Contents:- 2 x Shimano SLX BR-M7000 + BL-M7000 disc brake, front and rear
- 1 x Shimano SM-BH90-SBM 1000 mm front brake cable
- 1 x Shimano SM-BH90-SBM 1700 mm rear brake cable
- 2 pair of Shimano G025 brake pads
- 2 x insert pins
- 2 x olives
- 4 x caliper bolts
- 1 x bleed block (front)
- 1 x Shimano TL-BH61 assembly tool, 2-parts (front)
- 2 x springs
- rotor not included
- adapter not included
- mount ready (filled and bled)
Arvostele tämä tuote
Tälle tuotteelle ei ole vielä annettu arvosteluita.